Can the through-type shelves implement first-in-first-out? The wholesale factory of cold storage shelves explains.

The through-type shelving, also known as the drive-in type shelving or the corridor type shelving, is a type of dense heavy-duty shelving. It is widely used due to its extremely large storage capacity. Generally, it adopts an advanced and rear-out operation mode. Can the through-type shelving achieve first-in-first-out? The wholesale factory of cold storage shelving provides an analysis. 

OK. The first-in-first-out design features open ends at both the front and the back of the shelves, allowing for the insertion of goods from one side and their removal from the other. The last-in-first-out design involves the forklift entering and exiting the shelves from the same side. When storing, goods are placed from the outside to the inside, and when retrieving, they are taken out from the outside to the inside. To implement first-in-first-out, it is necessary to clearly define one end of the shelves as the inbound area and the other end as the outbound area. All newly arrived goods can only be stored at the inbound end, and the goods to be dispatched can only be extracted from the outbound end. It is essential to ensure that the channels at both ends of the shelves remain unobstructed at all times to allow for the smooth passage and operation of the forklift.

It can be seen that if first-in-first-out is to be designed, strict inbound and outbound management procedures must be in place. Under normal circumstances, through-bay shelves are designed as last-in-first-out. If first-in-first-out is required, gravity-driven roller shelves or shuttle shelves can be considered. Cold storage shelf wholesale factories can provide free design proposals based on customer needs.